P.O. Box : 45585, Abu Dhabi, UAE.  Tel : +971-02-4433787,  Fax  : +971-02-4453552. Email : info@patkruger.com

Loadcell

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Upon request, the force transducers can be supplied with other bore diameters as well. Bolt clearance should not exceed 2% of bore diameter. Special designs of 0.5 through 1.000 t are possible on request. For the measuring ranges 3 t through 20 t, light special shackles of alloyed, forged SAE steel are available. For accuracy requirements better than class 0.5,
maintenance-free ball-and-socket joints can be mounted in the force transducers of these measuring ranges.

 

 

 

 

 

 

 

DOWNLOAD

PAT force transducers stand out for

 

Extremely high overload capacity and

 

Fatigue strength

 

Simple, direct installation

 

High accuracy

 

Built-in measuring signal amplifier

 

Cost effective solution

 

Applications

 

Force measurement on cranes and winches: as transducer for safe load indicators and rated capacity indicators

 

Weight control in conjunction with a display unit

 

Tensile force measurements on vehicles, ships and tractors

 

Control of belt tension on conveyor systems

 

 

 

 

 

 

The PAT force transducers are designed to measure static and dynamic tensile forces in different applications.

 

The PAT force transducers consist of a measuring body of heat-treated steel which has virtually no hysteresis, a high overload capacity and fatigue strength. The wire strain gauges and measuring amplifiers with voltage stabilization for the bridge supply voltage are located in an encapsulated housing. The measuring body has the form of an eye shackle at both ends. The tensile forces are applied via these eye shackles by use of sufficiently dimensioned bolts or shackles. The measuring signal is led directly to the measuring value amplifier located in the force transducer.

The transducer is protected against temperature fluctuations, humidity and other influences by using high-quality material.