P.O. Box : 45585, Abu Dhabi, UAE.  Tel : +971-02-4433787,  Fax  : +971-02-4453552. Email : info@patkruger.com

iFlex5

Key Benefits

 

High performance

High number of I/Os

Various I/O types

Expandable network

Combination of systems via CANopen

suited for:

           conventional analog sensors

           CAN bus based systems

Open system architecture

One CPU unit for all systems

Common system software

CAN interface

Multitasking system

DOWNLOAD

Product Specifications

 

The iFLEX5 control systems all feature highly integrated hardware to form an high-performance control systems platform, that is designed completely open through industry-standard interface and engineering software tools.

All systems are based on a Power PC 32-bit CPU module with:

· 4 MByte Flash Memory

· 1 MByte RAM

· 128 kByte battery buffered RAM

· battery buffered real time clock

different serial interfaces

 

The hardware comes in 2 possible versions, allowing adaptation to the control task at hand. Both units feature a range of inputs and outputs, including digital and analog and CAN-Bus. Here is the precise mapping for both versions (Basi Board or Total):

iFLEX5® Next Generation LMI

 

The iFLEX5 control systems all feature highly integrated hardware to form an high-performance control systems platform, that is designed completely open through industry-standard interface and engineering software tools.

The iFLEX5 Load Moment Indicator (LMI) part puts a full range of precise information right in the cab. It is installed and calibrated to the load chart of each crane--including specific load and geometric limits on boom length, angle, and operating radius.

Leading edge technology gives the operator the information necessary to fully utilize the machine's working capacity, while keeping within the safe working limits of the machine.

The iFLEX5 is designed to be set up quickly and easily in the field. This is done through the user-friendly, self-guided, interactive setup procedure that is performed entirely through the operator console.

 

Powerful iFLEX5 hardware platform

Graphic interactive user interface

Worksite obstacle avoidance with operator-defined "virtual wall" in 3 dimensions

CanBus interface for all sensors and subsystems

Datalogging of operational and maintenance data

Telecommunications module for remote access of data or diagnostics

Meets the ANSI B 30.5 standard

Secure embedded LMI software and in the same unit an open programming part according the IEC 1131-3 standard.